Quick Answer: Is It OK To Hang A TV Above A Fireplace?

Is it safe to hang a TV on a brick fireplace?

Mounting a TV always requires special equipment, no matter what type of wall you use.

Mounting a TV above a brick fireplace requires masonry bits and a hammer drill to get the job done..

How do I protect my TV above a fireplace?

Install a heat shield, fireplace hood, or mantel above your fireplace opening to divert the heat from your TV. It is strongly suggested that you do not place your TV directly on the mantel as the mantel may not hold the weight of your TV.

Are there Studs above a fireplace?

Most homes are built with 16” on-center studs, which means there should be a stud every 16”. Keep this in mind if you have trouble finding studs above a fireplace. Don’t worry if you only find one stud when trying to mount a large TV or other heavy object.

What is behind the wall above my fireplace?

If you live in a newer home the walls above the fireplace are likely to be drywall over standard wood studs or furring strips. Studs are usually made of 2×4’s while furring strips are only an inch wide. … Either way, having drywall with wood supports is going to make mounting a TV over the fireplace a lot smoother.

Does TV need ventilation?

The TV is designed with slots and openings for necessary ventilation. … As a general guideline, the rear of the TV should be 2 to 6 inches away from the wall and the sides of the TV should have about 4 inches of ventilation space.

How high is too high to mount a TV?

According to standards laid out by the Society of Motion Picture & Television Engineers, you shouldn’t ever position your television so high that it requires viewers to tilt their heads up more than 35 degrees from eye level in order to see the top of the TV screen.

How far above a fireplace should a TV be mounted?

If in Doubt, Do a Little Math: Depending on the height of your mantel — or if you don’t have one, the top of the fireplace — hang the TV four to twelve inches above. If your mantel is higher than four feet, then hang the TV no more than six inches above.

Does heat from fireplace damage TV?

The short answer is – yes. However, to ensure your television isn’t damaged from the heat, care must be taken to ensure heat generated by the fireplace is redirected away from television. There are several ways to do this, such as installing a proper mantel and building an alcove for the television.

Does a fireplace make your house colder?

The standard fireplace is among the most inefficient heating devices you can operate. In fact, it can be so inefficient that in some cases it actually makes your house colder. … And although many modern fireplaces use renewable fuel, they’re not considered completely “green,” because they can add to air pollution.

How do you secure a TV to a brick fireplace?

Using a level, determine the desired height of the display. Next, attach the mount to the brick fireplace. Using a hammer drill, drill a hole (the same diameter as the anchor diameter) using a carbide-tipped masonry bit. Insert the Sleeve Anchor into the hole and make sure it is secure and positioned correctly.

How do you redirect heat from a fireplace?

If You Have a Fireplace or Wood-Burning or Pellet-Burning Furnace… First, if you also have forced air, turn the fan on to help circulate heat. Make sure your ceiling fans rotate clockwise so they pull cool air up off the floor and push warm air down. And also keep them running at their lowest speed.

How do you lay a room with a fireplace and TV?

Take advantage of having a narrow living room and make use of the big space by having the fireplace and TV in a separate wall. Make it visible and accessible by placing a massive sectional sofa for a sync result. Also place two lounge sofas with footstools in front of the fireplace for a more inviting aura.

Is it better to wall mount a TV or put it on a stand?

The biggest advantage of wall mounting your TV is the space it saves. You don’t need a table or any surface space to place the TV on, which can come in handy in a small room or house. … You can therefore have a larger screen size, without worrying about how you’ll have to place it in your viewing room.

What is a fireplace heat shield?

By installing the fireplace heat shield it will radiate more heat out of the fireplace. Protecting the fireplace wall and diverting thermal energy back into the room or outward to your outdoor patio. It can heat the room quicker and allow you to use less fuel for the fire.

Why are there no studs above my fireplace?

This is a common scenario when trying to find studs above a fireplace, where there may not know actually be any studs to find. At this point, you need to drill into the wall. … You could make the hole large enough to actually peer inside the wall, or just large enough to fit an angled, thin tool in the wall.